 |
Email: sales@turbohoses.com Phone: (925) 455-1066 Fax: (925) 455-1063 Hours: 9:00AM - 5:00PM PST |
|
|
|
|
| ||||
|
Noble m/12M400 Transmission Upgrade and 3.2 ltr Engine
July '08
TurboHoses' is now a dealer for BBS Wheels.
June '08
TH MOTORSPORTS
PRESENTS Nobles at ThunderHill
June 17, 2008
April '08
Tanner Foust drives a TurboHoses' built Noble. To be aired may 08 or early June 08
Jan. '08
The first single turbo Noble M400
Please contact us for pricing on Garrett Turbos
May '07
Hennessey Features 1000whp Viper
March '07
Exclusive West Coast Distributor
Feb '07
Import Racing Guru Vinny Ten visits TurboHoses
Dec '06
Underground Racing 1500whp Viper & Autobahn Motorsports 201Mph Supra
Aug '06
Rapid proto-type part to repair air jacker equipment for Federal Express. 48 hour turnaround time.
July '06
TurboHoses R&D Proto-types for General Motors next generation Diesel Engine.
June '06
Hennessey Performance dominates the competition in this years American Super Car Shootout.
May '06
Lingenfelter Twin Turbo Corvette Featured in Road and Track.
Nov '05 TurboHoses R&D supplies parts to these government subcontractors in the development of the next-gen unmanned vehicles:
General Atomics Aeronautical Systems' Unmanned Aircraft Vehicle (UAV)
UGCV: Unmanned Ground Combat Vehicle National Robotics Engineering Consortium's next-gen unmanned vehicle.
|
Plumbing your system can often seem to be the easiest portions of your build. However, there are occasions where there isn't enough room, piping changes sizes radically, angles change quickly with very little length to work with, piping pops off and unable to make bends without rubbing into other components. We often find that if you are unsure of the correct components, you will often purchase parts that our not necessary or find yourself short pieces that were crucial to completion of the system. Our R&D dept. designs many of the intercooler, intake, supercharger & turbocharger plumbing for many of the large aftermarket performance companies. We offer technical assistance to aid you in successfully connecting your system efficiently and effectively. If you find yourself unsure of which components to use, simply provide photos with a yard stick laying horizontally and vertically. Our fabrication dept. will provide you with the most economical method to connect your system. Below is an example of the necessary measurements.
|
|
Home | Products | Turbo Straight Hoses | Transitions/Reducers | 90 Degree Bend | 45 Degree Bend | Hump Hoses
Couplers/Connectors
|
BOV Adapter Hoses |
Clamps |
Metal Piping |
Dyno Testing |
R&D Vehicles | AirRam
Intake |
Air Filters
Livermore, CA 94551 |
