As modern technology has allowed the Supra community
to make over 1000whp, the components must also be able to support the additional amount of pressure and heat
introduced. Turbohoses takes the same technology used in the aerospace
products we supply to the U.S. Dept. of Defense and puts it to work. Our
in-house fabrication dept. uses state of the art machinery and technology
to assure you receive a product that is to your satisfaction.
Pictures
Item
Color
Price
Order
6" AirRam Intake
For those that want more power while retaining the stock turbos.
This is a must have!!!
One of the most restrictive pieces in the 93+ Twin
Turbo Supra is the intake. Our AirRam Technology smoothes out the
air pulses while providing a humongous volume and increased air speed through
our 6" AirRam and filter. Our custom engineered filter includes a
built in air guide (bottom right pic.) which gives incoming air a path to follow before
entering the system. As a result you will feel a faster spool time and
upper RPM (4K) throttle response.
Aluminum Air Ram, 6" Filter, Stainless Steel Clamps and
custom silicone hose.
In stock & ready to ship.
195.00
Not actual Filter shown.
Due out of MFG. late 1/05.
6"Airram w/ filter
Most people
think that a simple pipe and filter is all you need for an "effective"
intake system. If you are one of those people that scrounge for
every ounce of performance, this is it.
Our Airram
Technology correctly scavenges air into the system while increasing
velocity and decreasing spool time. We have also calculated the amount of
air needed to fuel 1000+hp. "EFFICIENTLY",this will give you an advantage
over the competition. Our airram kit will not only give you a
smoother running engine, but help provide the "correct" amount of air
necessary to feed that monster turbo.
For the do-it-yourselfer, our airram can be purchased alacart.
You will have to modify your existing intake pipe to accommodate the
filter and airram. Normally a 30 minute job.
Kit includes Airram, filter, clamps & Turbo Hose.
180.00
4" Supra Titan Stainless Cat-Back Exhaust
We are currently offering this exhaust system without the muffler.
We have found sourcing the muffler yourself cost effective and will allow
you the option of the muffler you desire. No welding will be
required for muffler installation, most mufflers will be a simple slip on
and use of a clamp for securing. We also have muffler clamp
which are included.
Made of 304SS and lightened exhaust hangers.
695.00
Greddy 3 Row Hose Replacement Kit
If you've turned up the boost and are over the 500hp point. This is a great time to replace the Greddy hoses with our
Turbohoses.
This will give you the confidence that your system will
hold together under load.
We also MFG. hose that are rated for 800+
hp engines which are can be special ordered. Pleaseemail us for information.
Reinforced with fiberglass.
162.45
3" Coupler/ 76MM
Currently in MFG.
If you are one of the few that are pushing your Supra to
the limit (700+HP), then these hoses are a necessity. Our new
compound adds an additional layer of fiberglass for maximum pressure and
burst resistance. No one has hoses like these.
These
are an excellent replacement for the Greddy 4 Row.
21.00
4" Coupler/ 101MM
Currently in MFG.
If you are one of the few that are pushing your Supra to
the limit, then these hoses are a necessity. Our new compound adds
an additional layer of fiberglass for maximum pressure resistance.
25.00
2 1/2" to 3" Transition/ 63mm to 76mm
Currently in MFG.
If you are one of the few that are pushing your Supra to
the limit, then these hoses are a necessity. Our new compound adds
an additional layer of fiberglass for maximum pressure resistance.
32.00
Aluminum Intercooler Piping
Custom made IC piping for Ebay intercooler.
Photo is a prototype that will be made in aluminum.
Full 3" piping that takes the most efficient route to the
IC inlet.
